Peak NM32LA
Gas Generator
MS-QuietBox II noise reduction system

The KRSS Engineering MS-QuietBox II™ system for Peak NM32LA Gas Generator is the N2QB2-NM32LA.

The innovative design allows for installation with no need to shut the instrument down enables quick setup and easy access for maintenance. The unique flat-pack construction is environmentally friendly, reducing shipping costs and can be assembled in 5 minutes with no need for tools. It also allows for service exchange of panels should you require one.

KRSS MS-QuietBox II are designed to make your laboratory safer by providing a number of unique standard features >> as well as additional options >> and benefits.

N2QB2-NM32LA Technical
Dimensions Inner Dimensions External Dimensions
MM
Inch
MM
Inch
Width
760
30
815
32
Depth
880
35
965
38
Height
810
32.5
820
32
Peak NM32LA Technical Information
Dimensions
MM
Inch
Width
Depth
Weight
GET A QUOTE >>
MS-QuietBox II for Peak NM32LA

Quieter working environment
MS-QuietBox IITM noise reduction system available for leading manufacturers which reduces noise by 15 db(A) (75%) and maintains chiller temperature with integral fans.

Maintain optimum generator temperature
Automatic thermal fans adjust speed to the ambient temperature. Designed to keep power consumption and noise levels at minimum and deliver high performance cooling when required.

Audible & visual alarm (on a battery back-up)
The MS-QuietBox II features a digital temperature display with a battery backup and audible/visual alarm as standard.

Fire resistant not fire retardant
Our high density ’0’ fire rated foam is manufactured by impregnating standard foam with liquid carbon which is dried leaving a fire resistant sound absorption material which is able to withstand various ignition sources. This end product is fire resistant not fire retardant, the difference being that fire retardant foam will burn until the ignition source is removed, whereas our foam will not burn.

3 Year Warranty with panel exchange
In the unlikely event of a fan failure, the simple modular design allows for an exchange panel to be sent for replacement. First contact KRSS to request your replacement panel. Once the panel arrives simply disconnect the power cable and undo the four thumb tight screws. Swap the panels and return the original panel to KRSS.